Debug help

D

dantheram

Board Regular
Joined
Aug 27, 2010
Messages
192
Office Version
  1. 365
Platform
  1. Windows
Hi all,

i cannot debug this code, i suspect it's not pushing the postcodes into the website but it's giving me precious little feedback as to whats wrong - any ideas?

Code: 
Sub Postcode_Distances()

Dim URL As String
Dim count As Integer
Dim waitCounter As Integer
Dim fromCheck As String
Dim toCheck As String
Dim explorerCounter As Integer
Dim resetExplorer As Integer
Dim waitTime As Integer ' seconds


count = 1
distance = 0
prevDistance = 0
prevdistance_direct = 0
waitTime = 2 'seconds
explorerCounter = 0
resetExplorer = 500 'restart explorer after this number of runs
URL = "http://www.freemaptools.com/distance-between-uk-postcodes.htm"


'get to webpage
Set IE = CreateObject("InternetExplorer.Application")
IE.Visible = True
IE.Navigate2 URL
Do While IE.readyState <> 4 Or IE.busy = True
    DoEvents
Loop
        
' Read website information for inputting postcodes
Set form = IE.Document.getElementsByTagName("Form")
Set inputform = form.Item(0)
Set Postcodebox = inputform.Item(0)
Set Postcodebox2 = inputform.Item(1)
Set POSTCODEbutton = inputform.Item(2)
        
Worksheets("Postcodes").Range("A1").Select
Calculate


Do While Range("Postcode_From_Check").Offset(count, 0) <> ""


    fromCheck = Range("Postcode_From_Check").Offset(count, 0).Value
    toCheck = Range("Postcode_To_Check").Offset(count, 0).Value
    manualCheck = Range("Manual_Postcode_Check").Offset(count, 0).Value
    
    If fromCheck = "Invalid" Or toCheck = "Invalid" Or manualCheck = "Invalid" Then
        Range("Distance").Offset(count, 0) = "xxxx"
        Range("Distance_Direct").Offset(count, 0) = "xxxx"
    ElseIf Range("Distance").Offset(count, 0) = "" Then
        ' Read 'from' postcode - if valid use given postcode, otherwise use corrected version
        Range("Distance").Offset(count, 0).Select
        If fromCheck = "Valid" Then
            StartLocation = Range("Postcode_From").Offset(count, 0).Value
        Else
            StartLocation = fromCheck
        End If
        
        ' Read 'to' postcode - if valid use given postcode, otherwise use corrected version
        If toCheck = "Valid" Then
            EndLocation = Range("Postcode_To").Offset(count, 0).Value
        Else
            EndLocation = toCheck
        End If
        
        ' Input postcodes and 'click' button
        Postcodebox.Value = StartLocation
        Postcodebox2.Value = EndLocation
        POSTCODEbutton.Click


        ' Wait until website is ready (this step may not be necessary for freemaptools.com)
        DoEvents
        Do While IE.readyState <> 4 Or IE.busy = True
            DoEvents
        Loop
        
        'Pause for a second
        Application.Wait Time + TimeSerial(0, 0, waitTime)
        
        waitCounter = 0
        
        ' Read website information reading off distance information
        Set Table = IE.Document.getElementsByTagName("Table")
        Set DistanceTable = Table.Item(0)
        Set DistanceRow = DistanceTable.Rows.Item(5)
        Set DistanceElement = DistanceRow.Cells.Item(0).Children(1)
        Set DistanceRow_Direct = DistanceTable.Rows.Item(4)
        Set DistanceElement_Direct = DistanceRow_Direct.Cells.Item(0).Children(1)
        
        ' Take distance from website
        distance = Val(Trim(DistanceElement.Value))
        distance_direct = Val(Trim(DistanceElement_Direct.Value))
        
        Do While prevDistance = distance Or prevdistance_direct = distance_direct
            ' Read website information reading off distance information
            Set Table = IE.Document.getElementsByTagName("Table")
            Set DistanceTable = Table.Item(0)
            Set DistanceRow = DistanceTable.Rows.Item(5)
            Set DistanceElement = DistanceRow.Cells.Item(0).Children(1)
            Set DistanceRow_Direct = DistanceTable.Rows.Item(4)
            Set DistanceElement_Direct = DistanceRow_Direct.Cells.Item(0).Children(1)
            
            ' Take distance from website
            distance = Val(Trim(DistanceElement.Value))
            distance_direct = Val(Trim(DistanceElement_Direct.Value))
            waitCounter = waitCounter + 1
            
            ' If takes too long then enter message
            If waitCounter > 5 * 10 ^ 3 Then
                'errorCheck = Left(DistanceTable.Rows.Item(2).innertext, 5)
                Range("Distance").Offset(count, 0) = "as above?"
                Range("Distance_Direct").Offset(count, 0) = "as above?"
                Exit Do
            End If
        Loop
        prevDistance = distance
        prevdistance_direct = distance_direct
        Range("Distance").Offset(count, 0).Select
        If Selection <> "as above?" Then
            Selection = distance
            Range("Distance_Direct").Offset(count, 0) = distance_direct
        End If
        
        'Reset Explorer
        explorerCounter = explorerCounter + 1
        If explorerCounter >= resetExplorer Then
            IE.Quit
            Set IE = CreateObject("InternetExplorer.Application")
            IE.Visible = True


            'get to webpage
            IE.Navigate2 URL
            Do While IE.readyState <> 4 Or IE.busy = True
                DoEvents
            Loop


            ' Read website information for inputting postcodes
            Set form = IE.Document.getElementsByTagName("Form")
            Set inputform = form.Item(0)
            Set Postcodebox = inputform.Item(0)
            Set Postcodebox2 = inputform.Item(1)
            Set POSTCODEbutton = inputform.Item(2)
            explorerCounter = 0
            prevDistance = 0
            prevdistance_direct = 0
        End If
        
    End If
    
    count = count + 1
Loop


IE.Quit


End Sub
 
Sort by date Sort by votes
Aye, I know.

I tried submitting the form like I suggested earlier and it did not like that.:)
 
Upvote 0

Excel Facts

Using Function Arguments with nested formulas
If writing INDEX in Func. Arguments, type MATCH(. Use the mouse to click inside MATCH in the formula bar. Dialog switches to MATCH.
BarryL said:
i think im having problems with objects not being defined .

I stripped it back and did a small test on the below and it worked, is the below what you expect the webpage to do?

reference for Microsoft Internet Controls needs to be added first.

Code: 
Sub test()
'tools > references > Microsoft Interent Controls
Dim IE As New InternetExplorer
Dim inpt As Object, ieObj As Object, ieBtn As Object, btn As Object




IE.Visible = True
IE.Navigate "http://www.freemaptools.com/distance-between-uk-postcodes.htm"
Do While IE.ReadyState <> 4 Or IE.Busy = True
    DoEvents
Loop


Set inpt = IE.Document.getelementsbytagname("Input")


StartLocation = "Cr3 0BF"
EndLocation = "CR3 0EA"


For Each ieObj In inpt
If ieObj.Name = "pointa" Then ieObj.Value = StartLocation
If ieObj.Name = "pointb" Then ieObj.Value = EndLocation
Next
Set btn = IE.Document.getelementsbyclassname("fmtbutton")


For Each ieBtn In btn
If ieBtn.innertext = " Show " Then
ieBtn.Click
Exit For
End If
Next
'IE.Quit
End Sub
Click to expand...

could someone help me revise the original code to include the above, please?
 
Upvote 0
What code do you have now?

If you have code that's filling in the 2 postcodes all you should need from BarryL's code is this part,
Code: 
et btn = IE.Document.getelementsbyclassname("fmtbutton")


For Each ieBtn In btn
If ieBtn.innertext = " Show " Then
ieBtn.Click
Exit For
End If
Next
'IE.Quit
End Sub
which is for submitting the form.
 
Upvote 0
Norie said:
What code do you have now?

If you have code that's filling in the 2 postcodes all you should need from BarryL's code is this part,
Code: 
et btn = IE.Document.getelementsbyclassname("fmtbutton")


For Each ieBtn In btn
If ieBtn.innertext = " Show " Then
ieBtn.Click
Exit For
End If
Next
'IE.Quit
End Sub
which is for submitting the form.
Click to expand...

have the exact same code as original, just with the mod on the form.item component.

where does the above need splicing in - i'm a bit of a novice but can usually get there in the end :)
 
Upvote 0
Don't really have time to go back through the thread.:)

Can you post what you currently have?
 
Upvote 0
Norie said:
Don't really have time to go back through the thread.:)

Can you post what you currently have?
Click to expand...

Code: 
Sub Postcode_Distances()

Dim URL As String
Dim count As Integer
Dim waitCounter As Integer
Dim fromCheck As String
Dim toCheck As String
Dim explorerCounter As Integer
Dim resetExplorer As Integer
Dim waitTime As Integer ' seconds


count = 1
distance = 0
prevDistance = 0
prevdistance_direct = 0
waitTime = 2 'seconds
explorerCounter = 0
resetExplorer = 500 'restart explorer after this number of runs
URL = "http://www.freemaptools.com/distance-between-uk-postcodes.htm"


'get to webpage
Set IE = CreateObject("InternetExplorer.Application")
IE.Visible = True
IE.Navigate2 URL
Do While IE.readyState <> 4 Or IE.busy = True
    DoEvents
Loop
        
' Read website information for inputting postcodes
Set form = IE.Document.getElementsByTagName("Form")
Set inputform = form.Item(1)
Set Postcodebox = inputform.Item(0)
Set Postcodebox2 = inputform.Item(1)
Set POSTCODEbutton = inputform.Item(2)
        
Worksheets("Postcodes").Range("A1").Select
Calculate


Do While Range("Postcode_From_Check").Offset(count, 0) <> ""


    fromCheck = Range("Postcode_From_Check").Offset(count, 0).Value
    toCheck = Range("Postcode_To_Check").Offset(count, 0).Value
    manualCheck = Range("Manual_Postcode_Check").Offset(count, 0).Value
    
    If fromCheck = "Invalid" Or toCheck = "Invalid" Or manualCheck = "Invalid" Then
        Range("Distance").Offset(count, 0) = "xxxx"
        Range("Distance_Direct").Offset(count, 0) = "xxxx"
    ElseIf Range("Distance").Offset(count, 0) = "" Then
        ' Read 'from' postcode - if valid use given postcode, otherwise use corrected version
        Range("Distance").Offset(count, 0).Select
        If fromCheck = "Valid" Then
            StartLocation = Range("Postcode_From").Offset(count, 0).Value
        Else
            StartLocation = fromCheck
        End If
        
        ' Read 'to' postcode - if valid use given postcode, otherwise use corrected version
        If toCheck = "Valid" Then
            EndLocation = Range("Postcode_To").Offset(count, 0).Value
        Else
            EndLocation = toCheck
        End If
        
        ' Input postcodes and 'click' button
        Postcodebox.Value = StartLocation
        Postcodebox2.Value = EndLocation
        POSTCODEbutton.Click


        ' Wait until website is ready (this step may not be necessary for freemaptools.com)
        DoEvents
        Do While IE.readyState <> 4 Or IE.busy = True
            DoEvents
        Loop
        
        'Pause for a second
        Application.Wait Time + TimeSerial(0, 0, waitTime)
        
        waitCounter = 0
        
        ' Read website information reading off distance information
        Set Table = IE.Document.getElementsByTagName("Table")
        Set DistanceTable = Table.Item(0)
        Set DistanceRow = DistanceTable.Rows.Item(5)
        Set DistanceElement = DistanceRow.Cells.Item(0).Children(1)
        Set DistanceRow_Direct = DistanceTable.Rows.Item(4)
        Set DistanceElement_Direct = DistanceRow_Direct.Cells.Item(0).Children(1)
        
        ' Take distance from website
        distance = Val(Trim(DistanceElement.Value))
        distance_direct = Val(Trim(DistanceElement_Direct.Value))
        
        Do While prevDistance = distance Or prevdistance_direct = distance_direct
            ' Read website information reading off distance information
            Set Table = IE.Document.getElementsByTagName("Table")
            Set DistanceTable = Table.Item(0)
            Set DistanceRow = DistanceTable.Rows.Item(5)
            Set DistanceElement = DistanceRow.Cells.Item(0).Children(1)
            Set DistanceRow_Direct = DistanceTable.Rows.Item(4)
            Set DistanceElement_Direct = DistanceRow_Direct.Cells.Item(0).Children(1)
            
            ' Take distance from website
            distance = Val(Trim(DistanceElement.Value))
            distance_direct = Val(Trim(DistanceElement_Direct.Value))
            waitCounter = waitCounter + 1
            
            ' If takes too long then enter message
            If waitCounter > 5 * 10 ^ 3 Then
                'errorCheck = Left(DistanceTable.Rows.Item(2).innertext, 5)
                Range("Distance").Offset(count, 0) = "as above?"
                Range("Distance_Direct").Offset(count, 0) = "as above?"
                Exit Do
            End If
        Loop
        prevDistance = distance
        prevdistance_direct = distance_direct
        Range("Distance").Offset(count, 0).Select
        If Selection <> "as above?" Then
            Selection = distance
            Range("Distance_Direct").Offset(count, 0) = distance_direct
        End If
        
        'Reset Explorer
        explorerCounter = explorerCounter + 1
        If explorerCounter >= resetExplorer Then
            IE.Quit
            Set IE = CreateObject("InternetExplorer.Application")
            IE.Visible = True


            'get to webpage
            IE.Navigate2 URL
            Do While IE.readyState <> 4 Or IE.busy = True
                DoEvents
            Loop


            ' Read website information for inputting postcodes
            Set form = IE.Document.getElementsByTagName("Form")
            Set inputform = form.Item(0)
            Set Postcodebox = inputform.Item(0)
            Set Postcodebox2 = inputform.Item(1)
            Set POSTCODEbutton = inputform.Item(2)
            explorerCounter = 0
            prevDistance = 0
            prevdistance_direct = 0
        End If
        
    End If
    
    count = count + 1
Loop


IE.Quit


End Sub
 
Upvote 0
Try this.
Code: 
Sub Postcode_Distances()
Dim URL As String
Dim count As Integer
Dim waitCounter As Integer
Dim fromCheck As String
Dim toCheck As String
Dim explorerCounter As Integer
Dim resetExplorer As Integer
Dim waitTime As Integer ' seconds
    
    
    count = 1
    distance = 0
    prevDistance = 0
    prevdistance_direct = 0
    waitTime = 2 'seconds
    explorerCounter = 0
    resetExplorer = 500 'restart explorer after this number of runs
    URL = "http://www.freemaptools.com/distance-between-uk-postcodes.htm"
    
    
    'get to webpage
    Set IE = CreateObject("InternetExplorer.Application")
    
    IE.Visible = True
    IE.Navigate2 URL
    
    Do While IE.readyState <> 4 Or IE.busy = True
        DoEvents
    Loop
    
    ' Read website information for inputting postcodes
    Set form = IE.Document.getElementsByTagName("Form")
    Set inputform = form.Item(1)
    Set postcodebox = inputform("pointa")
    Set postcodebox2 = inputform("pointb")
    Set btn = IE.Document.getelementsbyclassname("fmtbutton")
    
    For Each iebtn In btn
        If iebtn.innertext = " Show " Then
            Exit For
        End If
    Next
    
    Worksheets("Postcodes").Range("A1").Select
    Calculate
    
    
    Do While Range("Postcode_From_Check").Offset(count, 0) <> ""
        
        
        fromCheck = Range("Postcode_From_Check").Offset(count, 0).Value
        toCheck = Range("Postcode_To_Check").Offset(count, 0).Value
        manualCheck = Range("Manual_Postcode_Check").Offset(count, 0).Value
        
        If fromCheck = "Invalid" Or toCheck = "Invalid" Or manualCheck = "Invalid" Then
            Range("Distance").Offset(count, 0) = "xxxx"
            Range("Distance_Direct").Offset(count, 0) = "xxxx"
        ElseIf Range("Distance").Offset(count, 0) = "" Then
            ' Read 'from' postcode - if valid use given postcode, otherwise use corrected version
            Range("Distance").Offset(count, 0).Select
            If fromCheck = "Valid" Then
                StartLocation = Range("Postcode_From").Offset(count, 0).Value
            Else
                StartLocation = fromCheck
            End If
        
        ' Read 'to' postcode - if valid use given postcode, otherwise use corrected version
            If toCheck = "Valid" Then
                EndLocation = Range("Postcode_To").Offset(count, 0).Value
            Else
                EndLocation = toCheck
            End If
        
            ' Input postcodes and 'click' button
            postcodebox.Value = StartLocation
            postcodebox2.Value = EndLocation
            iebtn.Click
            
        
        ' Wait until website is ready (this step may not be necessary for freemaptools.com)
            DoEvents
            Do While IE.readyState <> 4 Or IE.busy = True
                DoEvents
            Loop
        
            'Pause for a second
            Application.Wait Time + TimeSerial(0, 0, waitTime)
            
            waitCounter = 0
            
            ' Read website information reading off distance information
            Set Table = IE.Document.getElementsByTagName("Table")
            Set DistanceTable = Table.Item(0)
            Set DistanceRow = DistanceTable.Rows.Item(5)
            Set DistanceElement = DistanceRow.Cells.Item(0).Children(1)
            Set DistanceRow_Direct = DistanceTable.Rows.Item(4)
            Set DistanceElement_Direct = DistanceRow_Direct.Cells.Item(0).Children(1)
            
            ' Take distance from website
            distance = Val(Trim(DistanceElement.Value))
            distance_direct = Val(Trim(DistanceElement_Direct.Value))
        
            Do While prevDistance = distance Or prevdistance_direct = distance_direct
                ' Read website information reading off distance information
                Set Table = IE.Document.getElementsByTagName("Table")
                Set DistanceTable = Table.Item(0)
                Set DistanceRow = DistanceTable.Rows.Item(5)
                Set DistanceElement = DistanceRow.Cells.Item(0).Children(1)
                Set DistanceRow_Direct = DistanceTable.Rows.Item(4)
                Set DistanceElement_Direct = DistanceRow_Direct.Cells.Item(0).Children(1)
                
                ' Take distance from website
                distance = Val(Trim(DistanceElement.Value))
                distance_direct = Val(Trim(DistanceElement_Direct.Value))
                waitCounter = waitCounter + 1
                
                ' If takes too long then enter message
                If waitCounter > 5 * 10 ^ 3 Then
                    'errorCheck = Left(DistanceTable.Rows.Item(2).innertext, 5)
                    Range("Distance").Offset(count, 0) = "as above?"
                    Range("Distance_Direct").Offset(count, 0) = "as above?"
                    Exit Do
                End If
            Loop
            
            prevDistance = distance
            prevdistance_direct = distance_direct
            Range("Distance").Offset(count, 0).Select
            
            If Selection <> "as above?" Then
                Selection = distance
                Range("Distance_Direct").Offset(count, 0) = distance_direct
            End If
            
            'Reset Explorer
            explorerCounter = explorerCounter + 1
            If explorerCounter >= resetExplorer Then
                IE.Quit
                Set IE = CreateObject("InternetExplorer.Application")
                IE.Visible = True
                
                
                'get to webpage
                IE.Navigate2 URL
                Do While IE.readyState <> 4 Or IE.busy = True
                    DoEvents
                Loop
                
                
                ' Read website information for inputting postcodes
                Set form = IE.Document.getElementsByTagName("Form")
                Set inputform = form.Item(1)
                Set postcodebox = inputform("pointa")
                Set postcodebox2 = inputform("pointb")
                Set btn = IE.Document.getelementsbyclassname("fmtbutton")
                
                For Each iebtn In btn
                    If iebtn.innertext = " Show " Then
                     Exit For
                    End If
                Next
                
                explorerCounter = 0
                prevDistance = 0
                prevdistance_direct = 0
            End If
        
        End If
        
        count = count + 1
    Loop
    
    
    IE.Quit


End Sub
 
Upvote 0
Norie said:
Try this.
Code: 
Sub Postcode_Distances()
Dim URL As String
Dim count As Integer
Dim waitCounter As Integer
Dim fromCheck As String
Dim toCheck As String
Dim explorerCounter As Integer
Dim resetExplorer As Integer
Dim waitTime As Integer ' seconds
    
    
    count = 1
    distance = 0
    prevDistance = 0
    prevdistance_direct = 0
    waitTime = 2 'seconds
    explorerCounter = 0
    resetExplorer = 500 'restart explorer after this number of runs
    URL = "http://www.freemaptools.com/distance-between-uk-postcodes.htm"
    
    
    'get to webpage
    Set IE = CreateObject("InternetExplorer.Application")
    
    IE.Visible = True
    IE.Navigate2 URL
    
    Do While IE.readyState <> 4 Or IE.busy = True
        DoEvents
    Loop
    
    ' Read website information for inputting postcodes
    Set form = IE.Document.getElementsByTagName("Form")
    Set inputform = form.Item(1)
    Set postcodebox = inputform("pointa")
    Set postcodebox2 = inputform("pointb")
    Set btn = IE.Document.getelementsbyclassname("fmtbutton")
    
    For Each iebtn In btn
        If iebtn.innertext = " Show " Then
            Exit For
        End If
    Next
    
    Worksheets("Postcodes").Range("A1").Select
    Calculate
    
    
    Do While Range("Postcode_From_Check").Offset(count, 0) <> ""
        
        
        fromCheck = Range("Postcode_From_Check").Offset(count, 0).Value
        toCheck = Range("Postcode_To_Check").Offset(count, 0).Value
        manualCheck = Range("Manual_Postcode_Check").Offset(count, 0).Value
        
        If fromCheck = "Invalid" Or toCheck = "Invalid" Or manualCheck = "Invalid" Then
            Range("Distance").Offset(count, 0) = "xxxx"
            Range("Distance_Direct").Offset(count, 0) = "xxxx"
        ElseIf Range("Distance").Offset(count, 0) = "" Then
            ' Read 'from' postcode - if valid use given postcode, otherwise use corrected version
            Range("Distance").Offset(count, 0).Select
            If fromCheck = "Valid" Then
                StartLocation = Range("Postcode_From").Offset(count, 0).Value
            Else
                StartLocation = fromCheck
            End If
        
        ' Read 'to' postcode - if valid use given postcode, otherwise use corrected version
            If toCheck = "Valid" Then
                EndLocation = Range("Postcode_To").Offset(count, 0).Value
            Else
                EndLocation = toCheck
            End If
        
            ' Input postcodes and 'click' button
            postcodebox.Value = StartLocation
            postcodebox2.Value = EndLocation
            iebtn.Click
            
        
        ' Wait until website is ready (this step may not be necessary for freemaptools.com)
            DoEvents
            Do While IE.readyState <> 4 Or IE.busy = True
                DoEvents
            Loop
        
            'Pause for a second
            Application.Wait Time + TimeSerial(0, 0, waitTime)
            
            waitCounter = 0
            
            ' Read website information reading off distance information
            Set Table = IE.Document.getElementsByTagName("Table")
            Set DistanceTable = Table.Item(0)
            Set DistanceRow = DistanceTable.Rows.Item(5)
            Set DistanceElement = DistanceRow.Cells.Item(0).Children(1)
            Set DistanceRow_Direct = DistanceTable.Rows.Item(4)
            Set DistanceElement_Direct = DistanceRow_Direct.Cells.Item(0).Children(1)
            
            ' Take distance from website
            distance = Val(Trim(DistanceElement.Value))
            distance_direct = Val(Trim(DistanceElement_Direct.Value))
        
            Do While prevDistance = distance Or prevdistance_direct = distance_direct
                ' Read website information reading off distance information
                Set Table = IE.Document.getElementsByTagName("Table")
                Set DistanceTable = Table.Item(0)
                Set DistanceRow = DistanceTable.Rows.Item(5)
                Set DistanceElement = DistanceRow.Cells.Item(0).Children(1)
                Set DistanceRow_Direct = DistanceTable.Rows.Item(4)
                Set DistanceElement_Direct = DistanceRow_Direct.Cells.Item(0).Children(1)
                
                ' Take distance from website
                distance = Val(Trim(DistanceElement.Value))
                distance_direct = Val(Trim(DistanceElement_Direct.Value))
                waitCounter = waitCounter + 1
                
                ' If takes too long then enter message
                If waitCounter > 5 * 10 ^ 3 Then
                    'errorCheck = Left(DistanceTable.Rows.Item(2).innertext, 5)
                    Range("Distance").Offset(count, 0) = "as above?"
                    Range("Distance_Direct").Offset(count, 0) = "as above?"
                    Exit Do
                End If
            Loop
            
            prevDistance = distance
            prevdistance_direct = distance_direct
            Range("Distance").Offset(count, 0).Select
            
            If Selection <> "as above?" Then
                Selection = distance
                Range("Distance_Direct").Offset(count, 0) = distance_direct
            End If
            
            'Reset Explorer
            explorerCounter = explorerCounter + 1
            If explorerCounter >= resetExplorer Then
                IE.Quit
                Set IE = CreateObject("InternetExplorer.Application")
                IE.Visible = True
                
                
                'get to webpage
                IE.Navigate2 URL
                Do While IE.readyState <> 4 Or IE.busy = True
                    DoEvents
                Loop
                
                
                ' Read website information for inputting postcodes
                Set form = IE.Document.getElementsByTagName("Form")
                Set inputform = form.Item(1)
                Set postcodebox = inputform("pointa")
                Set postcodebox2 = inputform("pointb")
                Set btn = IE.Document.getelementsbyclassname("fmtbutton")
                
                For Each iebtn In btn
                    If iebtn.innertext = " Show " Then
                     Exit For
                    End If
                Next
                
                explorerCounter = 0
                prevDistance = 0
                prevdistance_direct = 0
            End If
        
        End If
        
        count = count + 1
    Loop
    
    
    IE.Quit


End Sub
Click to expand...

ah thanks so much - will try later
 
Upvote 0
You must log in or register to reply here.

Similar threads

M
  • Question Question
Calculate driving distance between postcodes
2
Replies
12
Views
35K
Taul
Taul
A
  • Question Question
VBA macro running slow/crashing when autofilling with a UDF
2
Replies
17
Views
2K
offthelip
O

Forum statistics

Threads
1,224,823
Messages
6,181,181
Members
453,022
Latest member
Mohamed Magdi Tawfiq Emam

Share this page

We've detected that you are using an adblocker.

We have a great community of people providing Excel help here, but the hosting costs are enormous. You can help keep this site running by allowing ads on MrExcel.com.
Allow Ads at MrExcel

Which adblocker are you using?

Disable AdBlock

Follow these easy steps to disable AdBlock

1)Click on the icon in the browser’s toolbar.
2)Click on the icon in the browser’s toolbar.
2)Click on the "Pause on this site" option.
Go back

Disable AdBlock Plus

Follow these easy steps to disable AdBlock Plus

1)Click on the icon in the browser’s toolbar.
2)Click on the toggle to disable it for "mrexcel.com".
Go back

Disable uBlock Origin

Follow these easy steps to disable uBlock Origin

1)Click on the icon in the browser’s toolbar.
2)Click on the "Power" button.
3)Click on the "Refresh" button.
Go back

Disable uBlock

Follow these easy steps to disable uBlock

1)Click on the icon in the browser’s toolbar.
2)Click on the "Power" button.
3)Click on the "Refresh" button.
Go back
Back
Top